Your cookie settings.

Personalised experiences at full control.

This website uses cookies and similar technologies (“cookies”). Subject to your consent, will use analytical cookies to track which content interests you, and marketing cookies to display interest-based advertising. We use third-party providers for these measures, who may also use the data for their own purposes. 

You give your consent by clicking "Accept all" or by applying your individual settings. Your data may then also be processed in third countries outside the EU, such as the US, which do not have a corresponding level of data protection and where, in particular, access by local authorities may not be effectively prevented. You can revoke your consent with immediate effect at any time. If you click on "Reject all", only strictly necessary cookies will be used.
You are here: Home » Products » Joints » High Voltage » Integrally Pre-molded HV Insulation Joint


Integrally Pre-molded HV Insulation Joint

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button


Integrally Pre-molded HV Insulation Joint product introduction:

Porcelain bushing termination is mainly composed of terminals, porcelain bushings, stress cones, stress cone covers, tail pipes and other components filled with insulating oil. The stress cone is made of high electrical performance rubber molding, and the porcelain sleeve is made of high-strength porcelain with excellent performance. Key parts adopt a double-layer sealing structure to avoid water seepage and oil leakage during operation.

Composite casing is terminated. Its external insulation is a composite casing composed of an epoxy fiberglass tube with an insulating rubber rain skirt on the outside. The rest of the structure is similar to that of porcelain casing. Due to the use of rubber as the outer layer, it has good leakage resistance. Trace-resistant and hydrophobic, it has excellent anti-fouling properties. It can greatly reduce the harm caused by explosion to personnel and equipment when an accident occurs in the termination. The composite bushing termination is light in weight, only 40% of the porcelain bushing termination at the same voltage level, and is easy to install and transport.Suitable for power cables with rated voltages of 48/66kV, 56/77kV, 64/110kV, 76/138kV, and 127/220kV.

Product execution standards: IEC60840-2011, GB/T11017.3-2014

Integrally Pre-molded HV Insulation Joint product features:

Porcelain casing termination:

It adopts high-strength porcelain sleeve, which has high mechanical strength, good stability and no aging. It is especially suitable for coastal areas and areas with harsh natural environment.

It adopts an alternating structure of large and small umbrella skirts. Tests have proved that it has excellent pollution resistance and is suitable for Class IV pollution areas.

The sealing structure is specially designed with good sealing performance, eliminating possible defects such as water immersion and oil leakage.

The main insulating components have been tested in the factory according to standard regulations.

composite casing termination:

The epoxy casing is covered with a silicone rubber shed, and the casing is filled with high-quality liquid filler. It is suitable for densely populated areas and areas with concentrated electrical equipment.

It is safe and explosion-proof and will not harm people or nearby electrical equipment.

Light weight and easy to install.

It has good stain resistance and the external insulation is not easy to age.

The main insulating components have been tested in the factory according to standard regulations.

The company adheres to the concept of environmental friendliness and smart connection, and is willing to work with you to create green and sustainable development, leading smart technology power industry.

Product Category

Quick Links

Contact Us
Address:  No. 11, 6th Industrial Zone, Mashantou Community, Ma Tian Street, Guangming District, Shenzhen, CN 
Tel:  +86-755-2666-0819 
Hand phone:  +86-135-1015-8968 
Copyright © 2023 Shenzhen NKS Power Technology Co., Ltd. All Rights Reserved. Support by leadongSitemap. Privacy Policy
Leave a Message
Contact Us